Rubber, EVA, EPDM kneader machine
Function:
Mainly used for plasticating and mixing of natural rubber, synthetic rubber, reclaimed rubber and plastics, and used in the mixing of various low glue degree materials.
Features:
1. Mixing chamber tilting type: Hydraulic or motor drive
2. Rotor: Two-wing/blade or four-wing/blade rotor
3. Rotor surface: Plated with hard chrome, and polished treatment without any stick for rubber material
4. Rotor shafts end sealing: With good quality sealing and reasonable design
5. Gearbox reducer: Use qualified and famous brand
6. PLC control: Omron brand or as requested by customer
7. Dust collector: Available by requirement
Advantages:
1. Reasonable design, tightly construction, occupying small area, installing convenience.
2. High efficiency of production,
3. Easy to operate.
4. Easy for cleaning the mixing chamber and replacing color material. The mixing chamber adopts close construction. Cooling & heating system is good.
Our Services:
1. One year warranty after commissioning.
2. Engineers available to service machinery overseas.
3. If there is problem, we will give feedback within 24hours.
Any question about our products, please feel free to contact with us.
We are always pleased to serve you at any time.
Details parameters of internal Mixer machine
2.Specification
1. The plastic material in airtight plastic pressure under the condition of refining or mixed refine, high production efficiency, low labor strength, stable quality. The two edges rotor shearing type, the production process the plastic materials that can be fully tear make the material shear well reach dispersion and evenness.
2. The edges of the rotor peak surfacing wear-resisting hard alloy, and mixing rubber room and material part of the contact all use hard chromium plating fine polishing processing. Mixed refine chamber adopts clip set of type structure, can be out water/steam/medium oil, have good cooling or heating effect, adapt to all kinds of refined rubber refining technological requirements of the plastic.
3. From the back door charging, mixing rubber room maximum flip 140 ° forward unloading, and according to the customer requirement of process can be arbitrary regulation Angle, facilitate next process of connection.
4. The switch on the "w" type, facilitate materials can be fully mixing rubber or refining.
5. The electric control system the programmable logic controller (PLC), has the alarm, unloading operation, manual/automatic conversion, chain security protection function.
Rotor: It is designed to the hollow blades of Banbury type. The hollows are connected with axial hole of rotor shaft used as cooling or heating passage. The top edges of blades and the end faces of ~ rotor shaft are surface welded with cobalt-base hard alloy and grinding, then plating with hard chrome and polishing.
Function:
Mainly used for plasticating and mixing of natural rubber, synthetic rubber, reclaimed rubber and plastics, and used in the mixing of various low glue degree materials.
Features:
1. Mixing chamber tilting type: Hydraulic or motor drive
2. Rotor: Two-wing/blade or four-wing/blade rotor
3. Rotor surface: Plated with hard chrome, and polished treatment without any stick for rubber material
4. Rotor shafts end sealing: With good quality sealing and reasonable design
5. Gearbox reducer: Use qualified and famous brand
6. PLC control: Omron brand or as requested by customer
7. Dust collector: Available by requirement
Advantages:
1. Reasonable design, tightly construction, occupying small area, installing convenience.
2. High efficiency of production,
3. Easy to operate.
4. Easy for cleaning the mixing chamber and replacing color material. The mixing chamber adopts close construction. Cooling & heating system is good.
Our Services:
1. One year warranty after commissioning.
2. Engineers available to service machinery overseas.
3. If there is problem, we will give feedback within 24hours.
Any question about our products, please feel free to contact with us.
We are always pleased to serve you at any time.
Details parameters of internal Mixer machine
| Internal Mixer Model No. | X(S)N-35×30 | X(S)N-55×30 | X(S)N-75×30 | X(S)N-110×30 |
| Total volume of mixing chamber(L) | 75 | 125 | 170 | 250 |
| Working volume of mixing chamber(L) | 35 | 55 | 75 | 110 |
| Driving motor power(kW) | 55 | 75 | 110 | 185 |
| Tilting motor power(kW) | 2.2 | 2.2 | 4 | 5.5 |
| Tilting angle(°) | 140 | 140 | 140 | 140 |
| Rotational speed of the rotor (front /rear)(r/min) | 30/24.5 | 30/24.5 | 30/24.5 | 30/24.5 |
| Pressure of compressed air(MPa) | 0.5~0.8 | 0.6~0.8 | 0.6~0.8 | 0.6~0.8 |
| Capacity of compressed air(m3/min) | ≥0.9 | ≥1.0 | ≥ 1.0 | ≥1.5 |
| Pressure of cooling water (rubber mixing )(MPa) | 0.3~0.4 | 0.3~0.4 | 0.3~0.4 | 0.3~0.4 |
| Pressure of heating steam (plastics mixing )(MPa) | 0.5~0.8 | 0.5~0.8 | 0.5~0.8 | 0.5~0.8 |
| Dimensions(L * W *H)(mm) | 3200*1900*2950 | 3230*1927*2958 | 3325*2615*3105 | 4075*2712*3580 |
| Gross weight(t) | ~6.3 | ~7.1 | ~9.5 | ~14.9 |
2.Specification
1. The plastic material in airtight plastic pressure under the condition of refining or mixed refine, high production efficiency, low labor strength, stable quality. The two edges rotor shearing type, the production process the plastic materials that can be fully tear make the material shear well reach dispersion and evenness.
2. The edges of the rotor peak surfacing wear-resisting hard alloy, and mixing rubber room and material part of the contact all use hard chromium plating fine polishing processing. Mixed refine chamber adopts clip set of type structure, can be out water/steam/medium oil, have good cooling or heating effect, adapt to all kinds of refined rubber refining technological requirements of the plastic.
3. From the back door charging, mixing rubber room maximum flip 140 ° forward unloading, and according to the customer requirement of process can be arbitrary regulation Angle, facilitate next process of connection.
4. The switch on the "w" type, facilitate materials can be fully mixing rubber or refining.
5. The electric control system the programmable logic controller (PLC), has the alarm, unloading operation, manual/automatic conversion, chain security protection function.
Rotor: It is designed to the hollow blades of Banbury type. The hollows are connected with axial hole of rotor shaft used as cooling or heating passage. The top edges of blades and the end faces of ~ rotor shaft are surface welded with cobalt-base hard alloy and grinding, then plating with hard chrome and polishing.